Open interest (OI) is the number of futures or options contracts that traders have opened and not yet closed.

Volume counts how many contracts changed hands during a session. Open interest counts how many are still open at the end of it. If 500 contracts trade today and every trade simply passes an existing position from one trader to another, volume is 500 but OI doesn't change.

When OI rises, more contracts are outstanding. When it falls, fewer are left open. Every contract has a long and a short, so OI alone can't tell you what traders expect prices to do.

What is open interest?

Open interest is a running count of outstanding contracts. Each new contract adds to it, and each contract that is closed, expires or is exercised comes off.

Every contract has two sides, a long and a short. If 1,000 contracts are open, there are 1,000 longs and 1,000 shorts, but each contract is counted once, so OI is 1,000. One trader can hold many contracts, so OI says nothing about how many people are in the market.

For futures contracts, OI can be shown for one delivery month or totaled across all months. For options, each series (one underlying, expiry date, strike price and call or put type) has its own figure. Check which level your data covers before comparing numbers.

How does open interest increase or decrease?

Open interest rises when both sides of a trade open new positions and falls when both sides close existing ones. When one side opens and the other closes, a position simply changes hands and OI stays the same.

Buyer Seller Effect on open interest
Opens a long position Opens a short position Increases by the quantity traded
Closes a short position Closes a long position Decreases by the quantity traded
Opens a long position Closes a long position No change
Closes a short position Opens a short position No change

Buying alone doesn't push OI up, because a buy can open a long or close a short. What matters is whether each side is opening or closing.

For trading activity alone, ending OI = starting OI + contracts created − contracts closed out. Published OI also reflects expiries, exercises, deliveries and clearing adjustments, so the exchange's figure can move for reasons other than trading.

A worked example: three trades, two different totals

Take a new futures contract month that starts the session with no open positions. These three trades are the only activity that day.

  1. Trade 1: Alex buys 10 contracts to open, and Blake sells 10 to open. Ten new contracts now exist. Volume is 10 and OI is 10.
  2. Trade 2: Alex sells four to close, and Casey buys those four to open. Four contracts move from Alex to Casey. Alex is long six, Casey is long four and Blake is still short 10. Volume reaches 14, but OI stays at 10.
  3. Trade 3: Casey sells four to close, and Blake buys four to close. Casey is out, and Blake's short position falls to six. Volume reaches 18 and OI falls to six.

One session, three trades

  1. New positions open

    Alex buys 10. Blake sells 10.

    Session volume
    10
    Open interest
    10
  2. A position changes hands

    Alex closes 4. Casey opens 4.

    Session volume
    14
    Open interest
    10
  3. Positions close

    Casey closes 4. Blake closes 4.

    Session volume
    18
    Open interest
    6

At the end of the session, Alex's six long contracts are matched by Blake's six short contracts. Volume is 18 and open interest is six. Volume ran at three times open interest, so a busy session doesn't mean many new positions stayed open.

Open interest vs volume

Volume resets every session, while open interest carries over from one day to the next until positions close.

Feature Volume Open interest
What it measures Contracts traded during a period Contracts still outstanding
What adds to it Every completed trade A trade in which both sides open positions
Can it go down? Only through trade corrections Yes, when positions close, expire or are exercised
Does it start again each session? Daily volume does No; open contracts carry forward

Either number can be bigger. If 8,000 contracts are open at the end of the day and only 500 traded during it, OI is 16 times the day's volume.

Read together, the two numbers show what kind of activity you are looking at:

  • High volume, flat OI. Lots of trading left the outstanding count roughly unchanged. Positions may have changed hands, or openings and closings may have offset each other.
  • High volume, rising OI. More contracts remained open at the end of the session.
  • High volume, falling OI. Fewer contracts remained open. Check for an expiry or a roll before drawing a conclusion.

Is rising open interest bullish? Reading OI with price

Some traders use rising OI alongside a rising price as a sign that the move has more participation. The same rise in OI alongside a falling price would point to participation in a downtrend. Here are the four common readings.

Price Open interest How traders commonly read it
Rising Rising New positions are opening as the price climbs; traders read this as support for the uptrend.
Falling Rising New positions are opening as the price drops; traders read this as support for the downtrend.
Rising Falling Part of the rise may be short sellers buying back to close.
Falling Falling Part of the drop may be long holders selling to close.

Treat these readings as context for a trade idea. OI shows whether positions are growing or shrinking but not who holds them. A new short could be a producer hedging future output, and an options trade could be one leg of a spread.

Does high open interest mean good liquidity?

Not necessarily. High OI tells you that many positions are already held, but it doesn't show the price or size available for your next trade. Before trading, check the bid/ask spread and the size available in the order book against the order you plan to place.

Open interest in options and futures

The count works the same way in both markets, but options traders tend to mix up series and futures traders tend to miss a roll.

Options: compare the same series

A call expiring this Friday, a call at the same strike expiring next month and a put at that strike are three different OI figures. High call OI doesn't mean traders are betting on a rise. Every open call also has a seller, and either side can be part of a larger strategy; the same goes for puts. To compare put and call positions, traders often use the put/call ratio.

Futures: watch the contract month

Near expiry, traders who want to keep their exposure roll it from the front month into a later month. OI in the expiring contract then falls while OI in the next contract rises. Before you read a drop in one month as traders leaving the market, check the next month and the product total.

Contracts vs dollar value: why the unit matters

The unit matters because OI measured in dollars can rise just because the price rose, with no new contracts opened. Some data feeds show OI in contracts; others show it in units of the underlying asset or in dollars.

Take a hypothetical futures contract that represents one unit of an asset, so each $1 move in the asset changes the contract's value by $1. There are 1,000 open contracts. At $100 per unit, their notional value is $100,000. If the price rises to $120 and no contract is opened or closed, notional rises to $120,000.

Same contracts. Higher dollar value.

At $100 per unit

Open contracts
1,000
Notional value
$100,000

At $120 per unit

Open contracts
1,000
Notional value
$120,000

Contract count unchanged. Dollar notional up 20%.

Notional value rose 20% while the number of contracts stayed at 1,000. For this example, notional value = open contracts × units per contract × price.

Notional value measures the size of the underlying exposure. It isn't margin posted or new money invested. If a crypto dashboard quotes OI in dollars, check the contract count before concluding that traders are piling in.

Inverse contracts, common on crypto exchanges, flip the trap. Each one is worth a fixed number of dollars, so their OI in dollars stays the same when the price moves. Counted in bitcoin, the same OI shrinks as the price rises.

Is open interest updated in real time?

On most traditional futures and options exchanges, no. Exchanges and clearinghouses usually calculate OI once a day, after that day's trades, exercises and deliveries are processed. A live options chain can therefore show today's prices and volume next to OI from the previous count.

For futures, CME publishes preliminary and final reports, and a preliminary figure can change before the final release. Crypto derivatives exchanges are the main exception, since many update OI continuously on their websites and APIs. Whatever the source, check the date on the OI column, because today's price and yesterday's OI describe different periods.

Where to find open interest

For exchange-traded futures, start with the exchange's product page or daily bulletin. For listed options, most brokers' options chains show OI next to volume for each strike.

Reading a real futures report

In issue 207 of the CME Daily Bulletin, the preliminary figures for October 27, 2026 include this row for December WTI crude oil futures (CL). The table below uses that day's figures.

Report field Contracts
Globex volume 269,771
PNT/PIT volume 2,699
Combined reported volume 272,470
Open interest 278,801
Change in open interest −8,129

Combined volume is 269,771 contracts traded on Globex, CME's electronic platform, plus 2,699 traded privately or on the trading floor (the PNT/PIT row), or 272,470 in total. Open interest is a separate count. It shows 278,801 contracts still outstanding, 8,129 fewer than in the previous figure.

About 272,000 contracts changed hands while the number of open positions fell by just under 3%. The report gives only that net change. It doesn't show how many contracts were opened and how many were closed, so volume and OI alone can't tell you either count.

What to check before using OI

Run these six checks before you draw conclusions from an OI figure:

  1. Match the contract: use the same expiry and, for options, the same strike and call or put type.
  2. Check the unit: contracts, units of the asset and dollar notional answer different questions.
  3. Read the timestamp: find out whether the figure is current, delayed or preliminary.
  4. Check the coverage: one exchange's figure and an aggregator's all-venue total aren't comparable.
  5. Look for an expiry or roll: a fall in one month may come with a rise in the next.
  6. Check execution separately: use the spread and order-book size to judge the trade you can actually make.